Home > Product information > Hot water supply units for factories: Steam Bath and water tank replenishment units
Hot water supply units for factories: Steam

*Schematic drawings may be viewed after completing the membership registration.
[Click here to register as a member.]

Bath and water tank replenishment units

SVF set-up image

Steam optimal-temperature water replenishment unit

Steam+Water

Model Aperture (A) Flow (at 30°C UP)
Steam 0.3 MPa
Water 0.2 MPa *1
SVF-20×20 20×20×20 48ℓ/min
SVF-25×32 25×25×32 72ℓ/min
SVF-40×40 40×40×40 150ℓ/min
SVF-50×50 50×50×50 172ℓ/min

*1 The values indicate the flow when the exit of the mixing valve is kept open.
* The above product is made to order.
* A dedicated control panel is required.
Indoor installation type
When installing the unit, be sure to leave enough space around it for maintenance purposes.

Dedicated control panels for the SVF series

FL-SVF
Model Compatible model
FL-SVF SVF series

*The above product is made to order.
*Indoor installation type
*When placing an order, be sure to specify either 100 V AC or 200 V AC.

Water level gauge set

Model Number of electrodes
FL-400-3 3
FL-400-5 5
Accessories Wall-mounting metal part × 2 units
Braided vinyl hose, 2 m length
Hose nipple × 2 units
Hose nipple × 2 units

*Electrode bars (made of SUS304) provided as standard.
Three electrode bars are included in the package when any of the three-electrode models are delivered.
Likewise, five electrode bars are included in the package when any of the five-electrode models are delivered.
*Be sure to cut the electrode bars to a suitable length at the installation site before use.