Home > Product information > Hot water supply units for factories: Steam Hose-end-stoppable type steam hot water supply units
Hot water supply units for factories: Steam

*Schematic drawings may be viewed after completing the membership registration.
[Click here to register as a member.]

Hose-end-stoppable type steam hot water supply units

sample use of the FO-SVG

*The image illustrates a sample use of the FO-SVG series.

Hose-end-stoppable hose gun type
steam hot water supply units

Steam+Water

Model Aperture (A) Flow (at 30°C UP):
Steam 0.3 MPa;
Water 0.2 MPa *1
FO-SVG-15×20 15×15×20 28.5ℓ/min
FO-SVG-20×20 20×20×20 31.4ℓ/min

*1: The values indicate the flow when the exit of the mixing valve is kept open.
*To operate the flow switch, at least 10 L/min of water flow is required on the water supply side.
*A 100 V AC power outlet must be available near the unit.
*These units cannot be installed outdoors or in a place exposed to high temperature and high humidity.
*Superheated steam cannot be used unless it is decompressed before use.
*The supply of hot water is not available during a power outage.
*Hoses, hose guns, and hose hangers must be separately purchased.Click here for more details.
*When installing the unit, be sure to leave enough space around it for maintenance purposes.
*The above products are made to order.

Hose-end-stoppable steam hot water supply units
for washing hands

Steam+Water

Model Aperture (A) Flow (at 30°C UP):
Steam 0.3 MPa;
Water 0.2 MPa *1
FO-SVT-15×20 15×15×20 28.5ℓ/min
FO-SVT-20×20 20×20×20 31.4ℓ/min

*1: The values indicate the flow when the exit of the mixing valve is kept open.
*To operate the flow switch, at least 10 L/min of water flow is required on the water supply side.
*A 100 V AC power outlet must be available near the unit.
*These units cannot be installed outdoors or in a place exposed to high temperature and high humidity.
*Superheated steam cannot be used unless it is decompressed before use.
*The supply of hot water is not available during a power outage.
*Be sure to keep the steam pressure and water pressure equal to each other.
*When installing the unit, be sure to leave enough space around it for maintenance purposes.
*The above products are made to order.