Home > Product information > Hot water supply units for factories: Steam Single-push steam hot water supply units(with steam traps)
Hot water supply units for factories: Steam

*Schematic drawings may be viewed after completing the membership registration.
[Click here to register as a member.]

Single-push hot water supply units (with steam traps)

Sample use of the SQDY4

*The image illustrates a sample use of the SQDY4-P series.

Single-push steam hot water supply units (with S-traps)

Steam+Water

Model Aperture (A) Flow (at 30°C UP):
Steam 0.3 MPa;
Water 0.2 MPa *2
SQDY4-15 15×15×15 27.8ℓ/min
SQDY4-15×20 15×15×20 28.5ℓ/min
SQDY4-20S 20×20×20 31.4ℓ/min
SQDY4-20 20×20×20 48ℓ/min
SQDY4-25×32 25×25×32 72ℓ/min
SQDY4-40 40×40×40 150ℓ/min
SQDY4-50 50×50×50 172ℓ/min

*1: We also offer sanitary specification units (made to order), the gray area of which as depicted in the figure on the left is made of stainless steel.
*2: The values indicate the flow when the exit of the mixing valve is kept open.
*3: A union is attached to the top of the ball valve of SQDY4.
*The model names of the sanitary specification units are denoted as
“SQDY4(S)” with “(S)” signifying “sanitary.”
*There is no SUS flange attached to the exit of the pipes having an aperture of 25×32 and below.
*The back plate assembly is included for mounting the main unit.
*Indoor installation type
*When installing the unit, be sure to leave enough space around it for maintenance purposes.

Single-push steam hot water supply units
(with S-traps and water outlet pipes)

Steam+Water

Model Aperture (A) Flow (at 30°C UP):
Steam 0.3 MPa;
Water 0.2 MPa *2
SQDY4-15SP 15×15×16Φ 27.8ℓ/min
SQDY4-15P 15×15×19Φ 27.8ℓ/min
SQDY4-15×20P 15×15×19Φ 28.5ℓ/min
SQDY4-20SP 20×20×19Φ 31.4ℓ/min
SQDY4-20P 20×20×19Φ 48ℓ/min

*1: We also offer sanitary specification units (made to order), the gray area of which as depicted in the figure on the left is made of stainless steel.
*2: The values indicate the flow when the exit of the mixing valve is kept open.
*3: In addition to the standard length of 170 L, we offer water outlet pipes that are 240 L and 300 L as well.
*4: A union is attached to the top of the ball valve of SQDY4.
*The model names of the sanitary specification units are denoted as
“SQDY4(S)” with “(S)” signifying “sanitary.”
*The back plate assembly is included for mounting the main unit.
*Indoor installation type
*When installing the unit, be sure to leave enough space around it for maintenance purposes.

Single-push steam hot water supply units
(with S-traps, hose nipples, and check valves)

Steam+Water

Model Aperture (A) Compatible hose
(inside diameter) *2
SQDY4-15HN 15×15×14Φ 12.7Φ
SQDY4-15×20HN 15×15×20.5Φ 19Φ
SQDY4-20SHN 15×15×20.5Φ 19Φ
SQDY4-20HN 20×20×27Φ 25Φ
SQDY4-25×32HN 25×25×34Φ 32Φ

[Caution] Do not attach a hose gun or stop valve at the end of the hose under any circumstances.
(Be sure to use the units with the exit kept open at all times.)

*1: We also offer sanitary specification units (made to order), the gray area of which as depicted in the figure on the left is made of stainless steel.
*2: Click here to see the compatible hose models.
*3: A union is attached to the top of the ball valve of SQDY4.
*The model names of the sanitary specification units are denoted as
“SQDY4(S)” with “(S)” signifying “sanitary.”
*Be sure to use a connecting hose made of material that is difficult to bend.
*The back plate assembly is included for mounting the main unit.
*Indoor installation type
*When installing the unit, be sure to leave enough space around it for maintenance purposes.

Single-push steam hot water supply units
(with SQDY4-HN series and hose racks)

Steam+Water

Model Aperture (A) Compatible hose
(inside diameter) *2
SQDY4-15HR 15×15×14Φ 12.7Φ
SQDY4-15×20HR 15×15×20.5Φ 19Φ
SQDY4-20SHR 15×15×20.5Φ 19Φ
SQDY4-20HR 20×20×27Φ 25Φ
SQDY4-25×32HR 25×25×34Φ 32Φ

[Caution] Do not attach a hose gun or stop valve at the end of the hose under any circumstances.
(Be sure to use the units with the exit kept open at all times.)

*1: We also offer sanitary specification units (made to order), the gray area of which as depicted in the figure on the left is made of stainless steel.
*2: Click here to see the compatible hose models.
*3: A union is attached to the top of the ball valve of SQDY4.
*The model names of the sanitary specification units are denoted as
“SQDY4(S)” with “(S)” signifying “sanitary.”
*Be sure to use a connecting hose made of material that is difficult to bend.
*The back plate assembly is included for mounting the main unit.
*Indoor installation type
*When installing the unit, be sure to leave enough space around it for maintenance purposes.