Home > Product information > Jet bath system Jet bath units
Jet bath system

*Schematic drawings may be viewed after completing the membership registration.
[Click here to register as a member.]

Jet bath units

Refresh jets

Model Specification Aperture (A) Flow
(L/min)
at 0.2 MPa
Number of outlets Water Air
EJ-5 5 40×40 25 165
EJ-7 7 40×40 25 230
EJ-9 9 50×50 25 297

*The above products are made to order.

Lie-down bath jets and floating jet

Made of SUS304

Model Specification Aperture (A) Flow
(L/min)
at 0.2 MPa
Water Air
① JPL-300 Lie-down bath, for the thighs 40 20 150
② JPL-600 Lie-down bath, for the back 50 25 300
③ JPL-1000 Floating 65×2 40 770

*The above products are made to order.
*Two JPL-300 units are needed to work on both legs.
*When installing the JPL-1000, apply loop piping for the two pressurized water inlets and one air inlet.

Lie-down bath jet bath units

Model Product configuration
NEJ-10S Main unit, no water pillow or handrail
NEJ-10S-MT Main unit, one water pillow, two handrails
NEJ-MM Water pillow
NEJ-TS Handrail

*The above products are made to order.
■Inlet for circulating water: 50A (300 L/min/20 m or above)
■Inlet for air: 32A (one SAS2-32 unit also included)
■Inlet for cold water for the water pillow: 25A Outlet: 25A
■HIVPs (high-impact vinyl pipes) are already installed inside the unit.
■The water pillow and handrails are detachable.
[Ten NEXB-15 jet nozzles are included in the set.]
(Two for the shoulders, two for the back, two for the thighs, two for the calves, and two for the soles of the feet)

Lie-down bath jet bath unit with the Vibra mat and water pillow

Model Product configuration
NEJB-001 Main unit, one water pillow, two handrails

*The above product is made to order.

Active jet station

Model Aperture (A)
Water Air
JPLY-001 65 25

*The above product is made to order.

Sit-down bath unit

Model Aperture (A)
Water Air
SYB-001 25 15

*The above product is made to order.